Dural Durabase CI++ Decoupling Mat 30m2 Roll
Dural Durabase CI++ Decoupling Mat 30m² Roll is a professional tile matting solution designed to help reduce stress between the subfloor and tiled surface. Also known as a decoupling membrane, uncoupling membrane, anti-fracture matting or tile matting, it is ideal for floor tile installations where movement, cracks, screed drying, timber substrates or underfloor heating may be a concern.
This 30m² roll is suitable for use beneath tiles, slabs and natural stone coverings on critical or problematic substrates. It helps manage substrate movement, supports crack bridging and can improve the long-term performance of porcelain, ceramic, natural stone and large format floor tile installations.
Dural Durabase CI++ is especially useful for renovation projects, fresh screeds, concrete floors, calcium sulphate screeds, timber-based substrates and heated floors when installed correctly with suitable tile adhesive. Dural guidance states that the matting can be used over a range of substrates including cement screed, calcium sulphate screed, hot screeds, concrete, plywood, chipboard and wooden floorboards when the surface is correctly prepared.
Key Features
- 30m² roll of Dural Durabase CI++ decoupling matting
- Helps reduce the risk of tile and grout cracking caused by subfloor movement
- Crack bridging capability independently tested (KIWA GmbH test report)
- Suitable for porcelain tiles, ceramic tiles, slabs and natural stone
- Useful for fresh screed, renovation and problematic floor substrates
- Suitable for underfloor heating when installed correctly
- Helps manage movement stress between the substrate and tiled surface
- 4mm mat height
- 100cm roll width
- Yellow polyethylene construction
- Recommended adhesive trowel size: 4x4mm or 6x6mm notched trowel
- Suitable for tiles at least 50x50mm and minimum 5.5mm depth
Best For
- Bathroom floor tiles
- Kitchen floor tiles
- Large format porcelain tiles
- Natural stone tiles
- Renovation floors
- Concrete and screed substrates
- Timber, plywood and chipboard substrates when correctly prepared
- Underfloor heating installations
- High-traffic residential and commercial floors
Important Installation Notes
The subfloor must be load-bearing, level, clean and correctly prepared before installation. Dural recommends applying suitable tile adhesive with a 4x4mm or 6x6mm notched trowel and fully embedding the matting into the adhesive. Loose laying is not suitable. The mat can be installed from when the screed is walkable — always observe the tile adhesive manufacturer's specifications.
Dural Durabase CI++ is primarily a decoupling mat, not a complete waterproofing system by itself. For wet rooms, showers, bathrooms or areas requiring waterproofing, additional waterproofing membranes, sealing tapes or compatible accessories may be required.
Not sure why tile matting is important? Read our full guide: Why Decoupling Mat Is Important for Floor Tiles.